Transmission
The LUFS Standard
Before streaming platforms started normalising playback, the loudness wars were simple: whoever clipped hardest, won. Masters got brickwalled into distortion because a louder track felt more impactful on a playlist, in a club, through a car stereo. The metric everyone chased was peak level — keep the ceiling just below 0 dBFS and push everything else as loud as physics allowed. It was a crude race with audible losers.
LUFS changed the terms of the competition. The acronym stands for Loudness Units relative to Full Scale, and it measures perceived loudness over time rather than the instantaneous height of a waveform. Where peak metering asks how tall is the tallest spike?, LUFS asks how loud does this actually sound to a human ear across its duration? The underlying standard, ITU-R BS.1770, weights different frequencies according to how sensitively we hear them, then integrates that measurement across the whole track. It was developed for broadcast — television and radio needed a way to stop adverts sounding twice as loud as the programmes they interrupted — but it turned out to be exactly what streaming needed too.
Why Platforms Adopted It
When Spotify, Apple Music, YouTube and the rest began normalising playback, they needed a consistent target. If your track measured louder than their threshold, the platform would turn it down. If it measured quieter, some platforms would turn it up. The practical result: the loudness war became pointless overnight. Destroying your dynamic range to gain three extra LUFS just meant Spotify attenuated the whole track to match everyone else, and you’d thrown away the dynamics for nothing.
Each platform lands on a slightly different number. Spotify targets around -14 LUFS integrated. Apple Music sits close to -16 LUFS. YouTube normalises to approximately -14 LUFS as well, though its algorithm is more complex. Tidal and Amazon Music tend toward -14. These aren’t hard walls — they’re the levels at which the platform’s playback gain normalisation kicks in. Knowing them matters because the direction of error is asymmetrical.
If your master is louder than the target, the platform turns it down. You haven’t gained anything, and if you pushed hard to get there, your transients are flattened and your mix has lost the punch that made it interesting. If your master is quieter than the target, some platforms will apply upward gain — which is generally transparent — but others simply leave it at the lower level, meaning your track sits softer in a playlist context. Neither outcome is catastrophic, but neither is what you want.
Mastering to the Target
The practical implication is that mastering for a specific platform means aiming your integrated LUFS measurement at or just below that platform’s normalisation point, without over-limiting to get there. A well-balanced master for Spotify sits somewhere between -14 and -16 LUFS integrated. The mix breathes. Transients survive. The limiter is doing its job — catching peaks, not destroying them.
Genre changes the equation somewhat. A sparse acoustic record might sit naturally at -18 LUFS with a true peak well below -1 dBFS and sound exactly right. A dense electronic track might need to push closer to -9 or -10 LUFS to maintain the physical impact the genre demands, accepting that Spotify will turn it down — but knowing the mix was constructed to still hit hard at a lower playback level. The key insight is that dynamic range is preserved in the master, so attenuation doesn’t rob the track of life.
True peak is a separate but related consideration. Integrated LUFS describes the average perceived loudness; true peak measures the reconstructed peak level after digital-to-analogue conversion, where inter-sample peaks can clip even if your metered peak looks clean. Most mastering engineers and platform specifications recommend keeping true peak below -1 dBFS, sometimes -2 dBFS, to prevent clipping during lossy encoding. MP3 and AAC compression can push peaks higher than your original file, so headroom matters even after the limiter.
The shift LUFS represents is a shift in philosophy as much as measurement. It reframes the question from how much can I push this? to what level serves the music and survives the delivery chain intact? That’s not a limitation — it’s a release from a pointless constraint that was damaging records for three decades.
Use the Resonillator Loudness Guide to check your track’s integrated LUFS, true peak, and platform targets before you export.
Resonillator is free and always will be. If this was useful, consider supporting on Patreon or Buy Me a Coffee.
← All Transmissions